1/5
供应日本SHIMADZU日本SHIMADZU容体齿轮泵图1

供应日本SHIMADZU日本SHIMADZU容体齿轮泵

2022-02-16 15:478170已售
价格:¥2.00/台
材质:其它
用途:其它
起订:1台
供应:60台
发货:3天内
立即购买
材质 其它
用途 其它
流量 根据型号
转速 根据型号
品牌 日本SHIMADZU
型号 日本SHIMADZU

日本SHIMADZU容体齿轮泵

齿轮泵以其高温高压及**的耐腐蚀性特点,在国内外的聚酯化工的广泛应用。型号有SBJ等系列产品。


< SBJLV >
Compact type with discharge pressure of Max. 7 MPaG.
Design temperature : 350℃
Type of Shaft Seals :
*GP = Gland Packing + Bush + Cooling
*LF = Labyrinth (Inside of Bush) + Cooling + Gland Packing Sub
*LM = Labyrinth (outside of Bush) + Cooling + Gland Packing Sub
*M = Double Mechanical Seal
pump2 SBJLV.gif

 

< SBJ >
In the case of high viscosity, the SBJ series can deliver up to 25MPaG.
Design temperature : 350℃
pump3 SBJ.gif



< SBJL >
Compact type with discharge pressure of Max. 7MPaG
Design temperature : 350℃
pump4 SBJL.gif



< SBJS >
Most suitable for Raising pressure from vacuum to 2 MPaG.
Design temperature : 350℃
pump5 SBJS.gif



< SBJ - LL>
Most suitable for reliable feed under high suction pressure.
The SBJ-LL Gear Pump is used as a booster pump where suction pressures of over 1 MPaG are encountered.
Design temperature : 350℃
pump6 SBJ-LL.gif
< SBJV >
Capable of raising pressure from vacuum to 25 MPaG.
Pump capacity range : ~11,000cm3/rev. from 45cm3/rev. to 8,000cm3/rev.
(Pumps in operation for PET and PA)
pump1 SBJV.gif

 

< SBJLV >
Compact type with discharge pressure of Max. 7 MPaG.
Design temperature : 350℃
Type of Shaft Seals :
*GP = Gland Packing + Bush + Cooling
*LF = Labyrinth (Inside of Bush) + Cooling + Gland Packing Sub
*LM = Labyrinth (outside of Bush) + Cooling + Gland Packing Sub
*M = Double Mechanical Seal
pump2 SBJLV.gif

 

< SBJ >
In the case of high viscosity, the SBJ series can deliver up to 25MPaG.
Design temperature : 350℃
pump3 SBJ.gif



< SBJL >
Compact type with discharge pressure of Max. 7MPaG
Design temperature : 350℃
pump4 SBJL.gif



< SBJS >
Most suitable for Raising pressure from vacuum to 2 MPaG.
Design temperature : 350℃
pump5 SBJS.gif



< SBJ - LL>
Most suitable for reliable feed under high suction pressure.
The SBJ-LL Gear Pump is used as a booster pump where suction pressures of over 1 MPaG are encountered.
Design temperature : 350℃
pump6 SBJ-LL.gif
< SBJV >
Capable of raising pressure from vacuum to 25 MPaG.
Pump capacity range : ~11,000cm3/rev. from 45cm3/rev. to 8,000cm3/rev.
(Pumps in operation for PET and PA)
pump1 SBJV.gif
反对 0
举报 0
收藏 0
联系方式
 

深圳市美士德科技有限公司 © 2025 版权所有

技术支持:中国环保网

热线电话